High-speed powder blender &The choice of powder blender

High-speed powder blender
◆ silty variety of raw materials in a short period of time, an instant high-speed mixed, show uniform color capability.
◆ mixture and stir-wing slot to adopt all of SUS304 stainless steel, can also be the installation of heating and cooling.
◆ Exhibition powder mixed color, fully enclosed, auto-injector operation.
◆ low to high-speed mixing, to shorten the process, show a more even color bright.
◆ the whole machine to use SUS 304 stainless steel, aluminum, high-carbon steel and engineering plastics to create.
◆ Bucket AS can be expected to tilt down
The choice of powder blender
The ideal powder blender should have the following characteristics(Fischer 1960):
(a)efficient mixing action-to give satisfactory blending in the minimum time,
(b)gentle mixing action-to reduce mechanical fragmentation or agglomeration to a minimum,
(c)dust-free operation-the machine should preferably be sealed,
(d)easily cleanable-surfaces should be smooth, readily accessible and free from obstructions and crevices,
(e)complete discharge-minimum of product retained in the machine,
(f)low costings-installation, running, maintenance and power usage costs must be minimal.
The choice of powder blender may be determined by the need for batch or continuous operation, single or multiple processing, and the degree of precision blending required. Sometimes the choice is a compromise but most authorities agree that for simple powder mixing the tumbler-type blender is more effective than the blade or paddle-type as it can produce the maximum product mobility with the minimum of scraping or frictional action
A Special Ribbon Mixer
We are manufacturing ribbon blenders which are designed for efficient and homogeneous mixing of different ingredients and formulations. In this ribbon blender, curved horizontal ribbon blades lift and tumble material while conveying to the centre of the mixer drum where they are continuously overlapped and cross blended. In this Ribbon blender, material goes through upward and downward movements and also there is a cross blending action. The material is thus mixed thoroughly and homogeneously.
These ribbon blenders are extremely useful in chemical industries, ayurvedic formulation (Duheri churna and Trifala churna), pharmaceutical industries, pesticides and fertilizer and food processing industries and other industries. These are manufactured in a range of 25Kg to 10OOKg batch capacity in M.S. and S.S.
Following are some its salient features:
• Due to the unique design of the ribbon blender the time required for mixing is shortened.
• There is no dust formation while mixing
• The quality of Raw Material and the provision of efficient gear box results in lesser maintenance cost and much less service after sales.
What is a ribbon mixer
Ribbon mixers are a basic industrial mixing tool. They consist, basically, of a trough-shaped casing (usually 2 to 3 times longer than it is wide) with a semicircular bottom, fitted with a horizontal longitudinal shaft on which are mounted arms supporting a combination of ribbon blades, paddles or helical screws set at a fairly close clearance to the semicircular mixer body so that no layer of material remains on the bottom of the mixer. The most effective design of ribbon layout is the double spiral in which the outer ribbon moves the product in one direction and the inner ribbon moves it in the opposite direction. This creates axial flow and prevents any buildup of material moved by the blades as they rotate is relatively small so that mixing times can be long. The capacity of the mixer should not be exceeded otherwise the ribbon and/or blades are not effective and the surface layers of the powder do not get adequately mixed.
Ribbon mixers are normally operated at room temperature but they may be jacketed for steam heating (at atmospheric pressure)or water cooling, should this be called for .Although ribbon mixers are relatively standard in design there are many modifications and commercial design options available depending on:(a)materials characteristics;(b)production requirements, particularly batch size and working conditions; (c)machine characteristic such as loading and unloading facilities.

Powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

High-speed powder blender &The choice of powder blender