Special putty powder blender

Description
Special blender offer, putty powder putty powder blender, putty powder mixer price, putty powder mixer offer,  specializing in the production of putty powder mixer, putty powder mixer, putty powder mixer, powder blender, vertical mixer , vertical crushing mixer, crushing mixing combination9FH series of feed mixerFirst, the characteristics of:Feed mixer series the vertical 250,500,1000,2000 type applies to feed specialized processing operators and large, medium and small farms, feed processing. Advanced aircraft design, reasonable structure, reliable performance, easy maintenance, high efficiency, small footprint, saving time-saving, less dust, good sealing, is the best product of choice for the majority of breeding specialized households the economic wealth.
, Feed machine equipment, structure and working principle:The feed machine chassis welded high-quality materials, the feed inlet in the grinder at the top, can be matched with the various forms of feeding structure, the hammer is arranged symmetrically; feed machine work the material into the crushing chamber, rotating at high speed hammer blow and sieve friction, the material gradually be crushed, and the effect of centrifugal force and air through the bottom of the discharge from the mouth.
, Feed machine equipment use and safety precautions:1, in order to avoid unexpected machine in the transport, handling and other aspects of various parts of the bolts must be checked prior to use, the nut is loose, flat teeth, scalloped, the spindle nut without loosening. Rotate the pulley, check the machine, whether the collision phenomenon.Rotating machine is flexible, inside the debris, boot idling to three minutes, no anomalies in order to start operating.3, must pay attention to clear the debris material is strictly prohibited iron stone and other objects into the machine, so as not to damage the machine wounding.4 splice Toi should more than 4 meters length, 0.6 meters in diameter, the fabric can not be too close, use the material to ensure that the cloth bags have sufficient permeability.5, the feed should be uniform, pay attention to the power level of the load free to choke. Crushed particles is available when pumping plate feed rate regulator section.Hammer: When the corner of the wear and tear affect efficiency, can be the opposite of hammer U-turn (U-turn once with the tune, so as not to cause rotor imbalance) the replacement of the hammer to replace them all.7, a day before starting should bear the butter, 500 hours should check the bearing condition. The installation screen films burr side should be installed in the above. According to the fineness of the crushed materials, select a different diameter mesh sieve.
Fourth, the main technical parameters(powder blender)Mixing coefficient of variation: LV> = 8%Unit work area noise:> = 85db orUnit work area dust:> = 10mg / -Finished type: dry mixed feedOperator 1-2

powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

Special putty powder blender